Categories

System hiccups and false alarms can be exasperating, and even more concerning, may prevent your home’s security from working how it should. Fortunately, most issues, from false alarms to dead batteries, are straightforward to correct. Check out our recommendations for troubleshooting your home alarm system in Atlanta. We’ll help you keep your family members safe and your system operating as it should.

Test Your Home Security System In Atlanta

One of the most effective ways to troubleshoot your property’s defense is to test it! The latest systems permit you to put them in test mode to prevent you from triggering an emergency response from monitoring agents. After moving to test mode, do the following:

• Turn on your system as you typically would when going out.
• Open a door or window that uses a contact sensor, or try to trip another device. Close the door or window once you’re done so it doesn’t trigger the alarm when you switch out of test mode.
• Let the alarm sound for 60 seconds to ensure communications with the security company and to create an entry in the alarm activity log.
• Continue testing sensors as needed
• Review the alarm’s activity log to validate that everything’s working.

No need to worry, monitoring specialists can tell that your alarm system is involved in a test. Be sure to switch out of test mode when complete. It’s a good idea to test monthly or anytime you make changes to your home’s phone or internet service.

Check The Placement And State Of Motion Sensors

Although an crucial aspect of your alarm system, motion sensors are well known for false alarms. Prevent them with some basic troubleshooting.

• Perform a visual inspection. Are there things that could shift within the sensor’s detection range, like a window treatment taken by a breeze?
• Is the sensor covered in dust? Dirt, cobwebs, and debris can lead to poor performance. Ensure the sensor is clean.
• Does the motion detector have pet immunity you can activate? Some can be programmed to ignore pets up to 100 pounds.
• When was the battery replaced? Low batteries may impact performance or result in false alarms.
• Is the sensor facing a heat source? Excess heat from sunlight or a fireplace can trigger an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Warnings

One of the great things about new home security systems is that they’ll tell you when batteries are dying. If your system is equipped with a control panel or app, you’ll usually see alerts there. Depending on your system, you may detect an intermittent beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that need to be replaced every so often. It’s a good idea to keep batteries ready and establish a replacement schedule. Top systems also have a backup battery for the central control panel. This backup keeps your system running if you have a power outage and should recharge itself once the electricity is working again. If it doesn’t, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Atlanta 

As the foremost name in home security, ADT creates systems that supply unrivaled protection and functionality. Switching to test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always get updates when a sensor battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your Atlanta home. Call (404) 551-3078 or submit our form today!