Where To Place Carbon Monoxide Detectors In Your Atlanta Property
Property owners must safeguard against various risks like fire, flooding, and burglary. But what about a risk that can’t be perceived by human senses? Carbon monoxide presents a unique challenge as you may never be aware that it’s there. Nevertheless, using CO detectors can effectively safeguard yourself and your household. Explore more about this dangerous gas and where to place carbon monoxide detectors in your Atlanta residence.
What Is Carbon Monoxide?
Called the silent killer because of its lack of color, odor, or taste, carbon monoxide is a commonly found gas caused by an incomplete combustion of fuels. Any fuel-utilizing appliance like a fireplace or furnace can create carbon monoxide. Even though you typically won’t have any trouble, difficulties can present when equipment is not routinely inspected or adequately vented. These oversights may result in an accumulation of this potentially deadly gas in your home. Generators and heating appliances are the most common culprits for CO poisoning.
When in contact with lower levels of CO, you could experience dizziness, headaches, fatigue nausea, or vomiting. Prolonged exposure to higher levels may result in cardiopulmonary arrest, and potentially death.
Tips For Where To Place Atlanta Carbon Monoxide Detectors
If your home is without a carbon monoxide detector, purchase one today. If possible, you should use one on each level of your home, and that includes basements. Here are several tips on where to place carbon monoxide detectors in Atlanta:
- Put them on every floor, especially in places where you utilize fuel-burning appliances, including furnaces, gas dryers, fireplaces, and water heaters.
- Always use one within 10 feet of bedrooms. If you only get one carbon monoxide detector, this is where it should go.
- Position them about 10 to 20 feet away from sources of CO.
- Avoid placing them immediately above or beside fuel-utilizing appliances, as a bit of carbon monoxide could be released when they turn on and set off a false alarm.
- Fasten them to walls approximately five feet from the ground so they can sample air where people are breathing it.
- Avoid putting them in dead-air places and near doors or windows.
- Place one in rooms above attached garages.
Inspect your CO detectors often and maintain them according to manufacturer instructions. You will typically need to replace them within five or six years. You should also ensure any fuel-utilizing appliances are in in optimal working order and appropriately vented.